Your Measurement Partner
Product Highlight
R&S Spectrum Rider FPH
Frequency extension up to 31 GHz
R&S Spectrum Rider FPH
Frequency extension up to 31 GHz
New ProductS
R&S®SMCV100B vector signal generator
R&S®NGM200 Power supply series
- Max. output power: 120 W
- Voltage per channel: 0 V to 20 V
- Max. current per channel: 6 A
- Resolutions down to 1 µV/10 nA
- 500 ksample/s high-speed data logging
R&S®NRX Power Meter
- Intuitive operation with touch screen based GUI
- Supports up to four R&S®NRP and R&S®NRQ6 power sensors
- Supports all sensor-dependent measurement functions
- Optional high-precision CW and pulse mode reference source module
- Optional power reflection measurements with NRT-Zxx sensors
New Products
LF Series
Programmable DC Electronic Load
- 16 x 2 Big-Char Type LCD Display
- 5- Digit Resolution
- Protection : OVP, OCP, OPP, OTP, OVR, OCR
- Various mode : CC, CV, CR, CP, ON/OFF, Fuse test, Battery Test, Short, Cycling, Dynamic
- Easy Data checking(Volt, Curr, Watt, Time etc.)
- Input ON/OFF Key
- Front panel Key Lock function
- Excellent precision and high resolution
- Built-in Remote Sensing for Load Voltage(V-Sensing)
- Excellent load and line regulation
- Save and confirm up to 10 error messages
- Memory save and recall function(up to 10 operation states)
- Communication Interface : RS232, RS485 Standard(TCP/IP is optional)
- Compact Size : 600W in half of 19inch wide x 2U size
LP Series
Programmable DC Electronic Load
- Big size 20Char LCD Display
- Output ON/OFF Key.
- Front panel Key Lock function
- Alarm beep when events occur
- Excellent precise and high resolution.
- Built-in Remote Sensing for Load Voltage (V-Sensing)
- O.V.P(Over Voltage Protection) / O.P.P(Over Power protection)
- O.T.P(Over Temperature Protection) mode supplied.
- Excellent load and line regulation
- Save and confirm up to 10 error messages.
- Memory(operating state of voltage, current, OVP,OPP,OTP) store and recall available up to 10.
- 3U * 19inch half Rack Compact Size (300W, 600W)
- RS232C, RS485, USB standard
Value Instruments by Rohde & Schwarz
R&S®RTP oscilloscope R&S®SMBV100B Vector Signal Generator R&S®SMB100B RF Signal Generator
- Bandwidth: 4 GHz to 8 GHz
- Max. sample rate: 20 Gsample/s
- Max. memory depth: 2 Gsample
- Realtime deembedding
- All trigger events at full bandwidth
- Frequency range from 8 kHz to 3 GHz or 6 GHz
- Ultra high output power up to +34 dBm
- 500 MHz modulation bandwidth with perfect accuracy
- Excellent EVM and ACPR results up to high power levels
- Internal signal generation for all major digital communication standards
- Fully fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou and QZSS/SBAS
- Convenient operation via 7" touchscreen
- Frequency range from 8 kHz to 1 GHz, 3 GHz or 6 GHz
- Outstanding single sideband (SSB) phase noise of < –134 dBc (meas.) at 1 GHz and an offset of 20 kHz
- Very low wideband noise of < –153 dBc (typ.) at 15 MHz < f ≤ 6 GHz and an offset of 30 MHz
- Ultra high output power of 34 dBm (meas.) at 1 GHz
- Compact form factor with 2 HU and ¾ 19" width
R&S®FPL1000 Spectrum Analyzer
- Frequency range 5 kHz to 3 GHz
- SSB phase noise: –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
- DANL with preamplifier: –167 dBm from 10 MHz to 2 GHz
- Lightweight with small footprint
- Battery or 12/24 V DC operation (option)
- Use with power sensors (option)
- 40 MHz analysis bandwidth (option)
- Analog and digital signal analysis (option)
R&S®RTA4000 oscilloscope
- Bandwidth: 200 MHz to 1 GHz
- Sample rate: up to 5 Gsample/s
- Memory depth: up to 1 Gsample
- ADC resolution: 10-bit
- Display: 10.1’’ capacitive touchscreen
R&S®ZNL Vector Network Analyzer
- Frequency range from 5 kHz to 3 GHz (R&S®ZNL3) or 5 kHz to 6 GHz (R&S®ZNL6)
- Two-port vector network analyzer for bidirectional measurements
- Universal instrument concept:
- Vector network analyzer
- Fully integrated spectrum analyzer option (for R&S®ZNL3)
- Display of power meter measurements
- Wide dynamic range of typ. 130 dB
- Output power range from –40 dBm to typ. + 3 dBm
- Measurement bandwidths from 1 Hz to 500 kHz
- Fast measurements, i.e. 16.7 ms for 401 points (100 kHz IFBW, 200 MHz Span, 2-port TOSM (SOLT))
- Compact size and low weight (6 kg to 8 kg)
- Optional battery pack available
- Windows 10® operating system
R&S®ZNLE Vector Network Analyzer
- Frequency range from 1 MHz to 3 GHz or 1 MHz to 6 GHz
- Two-port vector network analyzer with a full S-parameter test set for bidirectional measurements on passive components
- Wide dynamic range of up to 120 dB (typ.)
- Measurement bandwidths from 1 Hz to 500 kHz
- Fast measurements, i.e. 8.7 ms for 401 points (100 kHz IFBW, 200 MHz span, corr. off)
- Compact size (depth 24 cm) and low weight (6 kg)
- Standalone instrument with 10.1" WXGA touchscreen
- Windows 10 operating system
R&S®RTB2000 oscilloscope
R&S®FPC1000 Spectrum Analyzer
-
Large, high-resolution 10.1” WXGA display
-
Frequency range from 5 kHz to 3 GHz (with frequency range extension option)
-
1 Hz to 3 MHz resolution bandwidth
-
Fast boot time of approx. 15 seconds
-
Extremely low noise floor down to typ. –165 dBm (with preamp)
-
High max. measurement power of +30 dBm (1 W)
-
Optional Wi-Fi interface
-
Optional RF preamplifier, modulation analysis, receiver mode, advanced measurements
- Low power consumption à fanless design, very quiet
R&S®NGE100 Power Supply Series
- R&S®NGE102 with two or R&S®NGE103 with three channels
- Max. output power of 66 W with R&S®NGE102, 100 W with R&S®NGE103 (33.6 W per channel)
- Max. output voltage of 32 V per channel (up to 64 V/96 V in serial operation)
- Max. output current of 3 A per channel (up to 6 A/9 A in parallel operation)
- Electronic fuse (OCP), overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP)
- USB interface (VCP/TMC), optional LAN (LXI), optional wireless LAN
- Optional digital I/O (4bit)
R&S®SMC100A Signal Generator
HM8118 LCR Bridge/Meter
- Measurement range: 20 Hz to 200 kHz (69 steps)
- Basic accuracy: 0.05 %
- Measurement rate: up to 12 values/s
- Automatic or manual selection of circuit type (serial, parallel)
- Measurement functions: L, C, R, |Z|, X, |Y|, G, B, D, Q, Φ, ∆, M, N
- Transformer measurement: mutual inductance and ratio
- Internal: 0 V to 5 V/0 mA to 200 mA (resolution: 10 mV/1 mA)
- External: 0 V to 40 V (bias voltage only)
- RS-232/USB dual interface for remote control, optionally IEEE-488 (GPIB)
- Fanless design
HMC8012 Digital Multimeter
- Measurement range: DC to 100 kHz
- Resolution: 1 μV, 100 nA, 1 mΩ, 1 pF, 1 Hz, 0.1 °C/F
- Basic accuracy: 0.015 % (DC)
- 5¾-digit display (480 000 counts)
- Simultaneous display of three measurement functions, e.g. DC + AC + statistics
- Measurement rate: up to 200 values/s
- Measurement functions: V (DC), I (DC), V (AC), I (AC), frequency, DC power, resistance (two and fourwire), temperature (PT100/PT500/PT1000), capacitance, diode and continuity test
- Mathematic functions: limit testing, min./max., average, offset, DC power, dB, dBm
- Data logging to internal memory or USB flash drive in CSV format
- Interfaces: USB-TMC/-VCP, Ethernet, LXI, IEEE-488 (GPIB)
- SCPI commands largely compatible with Agilent 34410A (HMC8012-G)
- HMC8012-G: HMC8012 incl. IEEE-488 (GPIB) interface
HMF2525/HMF2550 Arbitrary Function Generator
- Frequency range: 10 μHz to 25/50 MHz
- Triangle waveforms up to 10 MHz
- Output voltage: 5 mV to 10 V (Vpp) (into 50 Ω)
- Total harmonic distortion of 0.04 % (f < 100 kHz)
- Waveforms: sine, square, triangle/ramp, pulse, arbitrary (incl. predefined waveforms such as white/pink noise, cardinal sine, exponential rise/fall)
- Modulation modes: AM, FM, pulse, PWM, FSK (internal and external)
- External connectors: TRIGGER (I/O), SWEEP (O), MODULATION (I)
- External reference input/output (10 MHz) via BNC connector
- Arbitrary waveform generator: 250 Msample/s, 14 bit, 256 kpoint
- PC software (free of charge) to easily create user-defined waveforms
- Oscillographic signal display in realtime
- Front USB connector to easily save and recall waveforms and settings
- USB/RS-232 dual interface for remote control
- Fanless design
R&S®HMC8015 Power Analyzer
Home Page designs
- Power measurement range: 50 μW to 12 kW
- Analog bandwidth: DC to 100 kHz
- Sampling rate: 500 ksample/s
- 16‑bit resolution for current and voltage
- Basic accuracy: 0.05 %
- 26 different measurement and mathematical functions
HM8123 Universal Counter
- Measurement range: DC to 3 GHz
- Input A/B (BNC): DC to 200 MHz
- Input C (SMA): 100 MHz to 3 GHz
- Input impedance A/B: 50 Ω or 1 MΩ (switchable), sensitivity 25 mV
- Input impedance C: 50 Ω, sensitivity 30 mV
- 10-digit resolution (at 10 s gate time)
- Nine measurement functions, external GATE and ARMING connectors (BNC)
- External reference input/output (10 MHz) via BNC connector
- HM8123: TCXO (temperature stability: ±0.5 x 10-6), HM8123-X: OCXO (temperature stability: ±1.0 x 10-8)
- RS-232/USB dual interface, optionally IEEE-488 (GPIB)
- Fanless design
The quality you expect at an unexpected price
Does high quality equal high price?Value Instruments are versatile T&M instruments for everyday lab use.
- Quality T&M solutions engineered by Rohde & Schwarz
- Accurate, reliable, easy to use
- Comprehensive support thanks to the extensive service and technical support network